Auria Discussion Board

When I import a MIDI file I always have to go track by track and change the output from Lyra to my external synth. Can we have a default "MIDI Output" so that when a midi file is imported all the channels are set to the default "Output" instead of Lyra? This change will also impr...

It would be nice if that can be added in a future release. Certain external sequencers select banks by combining the MSB and LSB into one single MIDI Bank Select message. They do so using the equation (MSB x 128) + LSB. i.e. Bank Number 11927 would be translated to CC0 MSB = 93 (11927 / 128) CC32 LS...

Some synths require only the CC0 + Program Change to call up a patch on the synth. i.e. Select Bank 6, Patch 11. Type Data 1 Data 2 Controller CC0 5 Pgm Change 10 You can have up to 128 banks and each bank can have 128 patches. With this approach you can address up to 128 * 128 = 16,384 patches. Oth...

Hi, Thanks for the fix! I had to set my external keyboard to receive bank changes using "Bank Select 0". If an external keyboard or module is set to receive bank changes using "Bank Select 0/32" the bank/patch dropdowns in Auria will not work. For imported midi files I had to swi...

Thank you, UI now works but Patch changes are still not working.
http://www.youtube.com/watch?v=OImvr4_Q8LU

Going back to the multi-purpose MIDI channel box. I setup a new Song, with a couple of channels. Ch 1 – Piano (Channel is set to 1) Ch 2 – Strings (Channel is set to 2) I record enable channel 1 and recorded the piano (it worked fine) I record enable channel 2 and it did not record anything on chann...

It is a Kurzweil PC3x.

I'm currently using an external Sound Module to play sounds. Most sequencers have the "Channel" selection as two separate items. i.e. Channel 1 Input Channel = All Output Channel = 1 Channel 2 Input Channel = All Output Channel = 2 Current issue is that all channels are set to the same sou...

Not sure if this is possible.
When a MIDI file is imported all channels are set to All. Is it possible to populate them with the channel from the MIDI file?

Thanks,
Ruben

Forgot to mention.

Bank/Patch changes are not sent to the keyboard.

Looks like Auria is only sending the Patch Change, but it is missing the Bank part.

Thanks,
Ruben

Thank you

Should Bank/Patch be populated when a MIDI file is imported?

I selected FX, Parameters section is showing:
Bank: Off Patch: Off

Piano Roll does show the
Program Change
BankSel MSB
BankSel LSB

Thanks,
Ruben

Hi, I'm using iConnectMIDI4. Any patch selection above Bank 1 does not work. Steps to re-create the issue: 1 - Create new project 2 - Create new MIDI track 3. Select FX 4 - Under "Parameters" group, Set Bank = 2 5 - Under "Parameters" group, Set Patch = 10 Problem: Bank is set to...