Trigger open and closed HH in Drumagog

For general questions or discussion of Auria.

Moderators: Corey W, Rim

Post Reply
thebioguy
Expert
Posts: 85
Joined: Fri Dec 14, 2012 5:03 pm

Trigger open and closed HH in Drumagog

Post by thebioguy » Wed Jan 16, 2013 5:55 pm

OK,

I have a track with open and closed HH. How do I get Drumagog to trigger OPEN for the open HH and CLOSED for the closed HH?

Thanks.

Rim
Site Admin
Posts: 8476
Joined: Fri Dec 23, 2005 11:08 pm

Re: Trigger open and closed HH in Drumagog

Post by Rim » Wed Jan 16, 2013 6:06 pm

Only the PC/Mac version of Drumagog has auto HH tracking. With the Auria version, this must be done manually by moving the articulation control. Of course, you'll need to have a HH gog file loaded which has multiple articulations in it.

You can automate the articulation control in Auria.

Rim

thebioguy
Expert
Posts: 85
Joined: Fri Dec 14, 2012 5:03 pm

Re: Trigger open and closed HH in Drumagog

Post by thebioguy » Sat Jan 19, 2013 10:31 am

My thought was to duplicate the HH track. On one, set the threshold to trigger open, on the other set the threshold to trigger closed. Is there a way to do that?

Rim
Site Admin
Posts: 8476
Joined: Fri Dec 23, 2005 11:08 pm

Re: Trigger open and closed HH in Drumagog

Post by Rim » Sat Jan 19, 2013 7:43 pm

Usually, the volumes are too similar between open and closed hi hats, so there's no way to do it the way you describe.

Rim

thebioguy
Expert
Posts: 85
Joined: Fri Dec 14, 2012 5:03 pm

Re: Trigger open and closed HH in Drumagog

Post by thebioguy » Sun Jan 20, 2013 6:11 am

The volume of the open HH is 1/2 of the closed HH on my track. Does this mean there is a way to do as I described? Thanks.

Rim
Site Admin
Posts: 8476
Joined: Fri Dec 23, 2005 11:08 pm

Re: Trigger open and closed HH in Drumagog

Post by Rim » Sun Jan 20, 2013 6:23 am

Sure! If that's the case, you may be in luck. Try it and see what happens.

Rim

User avatar
vezinho
Expert
Posts: 55
Joined: Thu Aug 16, 2012 2:25 am

Re: Trigger open and closed HH in Drumagog

Post by vezinho » Sat Mar 09, 2013 7:01 am

Hi Rim,

I don't know if I would be able to describe my problem...
Regarding the articulation control with hihat in drumagog, I want to make for example a shot opened and immediately after a shot closed.
My problem is that when I make this shot fully opened, it stays opened and the following shot doesn't close it...
Is there a way to do it? Cause the articulation system is pretty useless like that...
Excuse my poor English...

Thanks by advance Rim...

Ps: used the articulation automation points.

Rim
Site Admin
Posts: 8476
Joined: Fri Dec 23, 2005 11:08 pm

Re: Trigger open and closed HH in Drumagog

Post by Rim » Sat Mar 09, 2013 8:01 am

The full version of Drumagog for the Mac/PC will support what you're describing. There's a control in the settings on that version called "choke", which will choke the open hh sample when a closed hh sample is played. But this is part of the auto hihat tracking system, and is difficult to port to the Auria version, so it's only available in the full version.

Rim

User avatar
vezinho
Expert
Posts: 55
Joined: Thu Aug 16, 2012 2:25 am

Re: Trigger open and closed HH in Drumagog

Post by vezinho » Sat Mar 09, 2013 8:39 am

Thanks a lot for your very rapid response ( as always)
I understand... It's embarrassing as I don't know how to do it without this feature...
Would it be possible to have it one day on ipad ? Ram or processing problem ? Maybe with next ipad ?

Thanks Rim

Rim
Site Admin
Posts: 8476
Joined: Fri Dec 23, 2005 11:08 pm

Re: Trigger open and closed HH in Drumagog

Post by Rim » Sat Mar 09, 2013 10:04 am

It's a definite possibility, yes.

Rim

Post Reply

Who is online

Users browsing this forum: No registered users and 204 guests