How to Automate Panning

For general questions or discussion of Auria.

Moderators: Corey W, Rim

Post Reply
G-master G
Expert
Posts: 65
Joined: Fri Aug 16, 2013 1:04 am

How to Automate Panning

Post by G-master G » Wed Apr 02, 2014 11:28 pm

Hello there,

I have recorded some chimes and I would like them to travel from hard right to hard left. Do I do this by:

1. automating the panning;
2. use to tracks panned hard left and hard right and then automate the faders to bring one up whilst bringing the other down; or
3. some other way.

Whichever method, I would appreciate it if somebody could respond and explain how.

Cheers

Grant

ajmack302
Expert
Posts: 160
Joined: Wed Aug 01, 2012 7:07 am

Re: How to Automate Panning

Post by ajmack302 » Thu Apr 03, 2014 1:22 am

Hi there, when I want the swirly panning effect I generally automate the panning, I find that easier as you have a good control of the speed you want the panning to be.
If you're not sure of the steps, I would do it like this.

1.Pan chimes hard right/left
2.Press W on this tracks channelstrip
3.Press play on the transport
4.When you want the panning to start, turn the pan dial from right to left or vice versa.
5.When you're happy with that, press the W switch off and press the R.
6.Job done.

Good luck

Aaron

G-master G
Expert
Posts: 65
Joined: Fri Aug 16, 2013 1:04 am

Re: How to Automate Panning

Post by G-master G » Thu Apr 10, 2014 12:45 am

Thanks Aaron I will give it a go.

Cheers

Grant

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests