I have some difficulty to understand how to add effects on the recorded sound. It seems to me that I can insert the effect if I choose the effect(s) on “CHANNEL STRIP” in the “FX” section. But what about Send-Return effects? Would you instruct? Or you can show me the pages of the explanation on the manual.
Also, it seems to me the effects on the Auria is limited to a couple of reverbs and delays. Can there be anything else such as chorus, distortion, flanger or some other special effects?
Effects in the Auria
Re: Effects in the Auria
use a plugin slot in the channel strip to apply fx to a track either while recording or after during mixing. This has the added advantage that the fx can be changed afterwards if necessary.
You can purchase more fx in the plugin store (bottom of plugin menu).
There is a good variety of professional grade plugins to buy (especially all the fabfilter ones)
You can purchase more fx in the plugin store (bottom of plugin menu).
There is a good variety of professional grade plugins to buy (especially all the fabfilter ones)
Re: Effects in the Auria
To use fx as a send you have to insert them in the fx slot on the master track labeled "Aux Fx" typically you would then set your fx signal all the way to "wet" in the fx app/plugin you are using. Then you can control the amount of each track sent to that particular fx by using the aux 1-6 knob on each indivual channel strip.
Re: Effects in the Auria
Thank you for your information. But how can I make a track labeled "Aux Fx"?
Re: Effects in the Auria
Cpu_red was referring to the button on the master track that's called "AUX FX".
Rim
Rim
Re: Effects in the Auria
Thank you very much. Now I found the “AUX FX” button in the upper part of Master Channel, which is located the rightest in the Mix Window screen. This must be it.
When I click the button, I found 6 “AUX”s. Also I found “AUX 1” and “AUX 2” knobs on each track in the Mix Window screen.
Does this mean only AUX 1 and AUX 2 can be assigned for specific tracks individually? Does this also mean the AUXs 3 to 6 are effective to the Master Channel? I.e. the effects which are assigned for AUXs 3 to 6 can work only for total tracks, not for a specific single track?
Terribly sorry for repeated rudimentary questions.
When I click the button, I found 6 “AUX”s. Also I found “AUX 1” and “AUX 2” knobs on each track in the Mix Window screen.
Does this mean only AUX 1 and AUX 2 can be assigned for specific tracks individually? Does this also mean the AUXs 3 to 6 are effective to the Master Channel? I.e. the effects which are assigned for AUXs 3 to 6 can work only for total tracks, not for a specific single track?
Terribly sorry for repeated rudimentary questions.
Re: Effects in the Auria
If you click on aux 3/4 in the master strip, you'll notice that all the aux sends in each channel strip flip to 3/4. Click on 5/6 in the master, all the channel strips flip to 5/6.
Who is online
Users browsing this forum: No registered users and 379 guests