K-Mix

For topics specifically about audio interfaces (USB, MFi, Camera Connection Kit)

Moderators: Corey W, Rim

sELF
Expert
Posts: 75
Joined: Mon Jun 03, 2013 4:51 pm
Location: Berlin/London
Contact:

K-Mix

Post by sELF » Sun Nov 01, 2015 8:17 pm

Has anyone used one of these with Auria? Wondering if I can get 8 channels of sound into Auria at the same time! I haven't heard much about this yet? 24/96 sounds good. For a minimal setup like mine! Other than that I'm looking at a Yamaha MG 12 or 16 with stereo 24/96 class compliant output... Or Mr Xmas is gonna buy me an Apogee Quartet & a mixer! Any tips appreciated :D

/http://www.sweetwater.com/insync/keith- ... x-unveiled

sELF
Expert
Posts: 75
Joined: Mon Jun 03, 2013 4:51 pm
Location: Berlin/London
Contact:

Re: K-Mix

Post by sELF » Wed Nov 11, 2015 7:04 pm

Bump :|

miguelmarcos
Expert
Posts: 46
Joined: Sat Apr 12, 2014 11:23 am

Re: K-Mix

Post by miguelmarcos » Thu Nov 12, 2015 3:52 pm

I'm looking at the Yamaha MG12 UX myself. I had thought about getting annAudient interface but I think a mixer will be more practical for me.

sELF
Expert
Posts: 75
Joined: Mon Jun 03, 2013 4:51 pm
Location: Berlin/London
Contact:

Re: K-Mix

Post by sELF » Thu Nov 12, 2015 4:28 pm

The Yamaha should have a good sound card! But, I'm still hoping for multi channel output, into Auria. I'm surprised that there are such limited options, mixer wise!

Kites
Expert
Posts: 50
Joined: Thu Dec 31, 2015 9:18 pm

Re: K-Mix

Post by Kites » Tue May 31, 2016 8:26 am

Alright, who's got one on here? The latest update seemed to have fixed iPad issues.

geremy
Member
Posts: 6
Joined: Thu Jun 02, 2016 2:20 pm

Re: K-Mix

Post by geremy » Thu Jun 02, 2016 9:12 pm

Happy to report that with the latest firmware (5/27/2016) the k-mix is working very well. All 8 ins and 10 outs show up in the io matrix. Recording is good. I wish Auria had an 88200 kHz setting!

iPad Air 1, iOS 9.3.2

Kites
Expert
Posts: 50
Joined: Thu Dec 31, 2015 9:18 pm

Re: K-Mix

Post by Kites » Thu Jun 02, 2016 10:27 pm

geremy wrote:Happy to report that with the latest firmware (5/27/2016) the k-mix is working very well. All 8 ins and 10 outs show up in the io matrix. Recording is good. I wish Auria had an 88200 kHz setting!

iPad Air 1, iOS 9.3.2
Does the K-mix work as a surface control for Auria? Been dying to find out. :oops:

geremy
Member
Posts: 6
Joined: Thu Jun 02, 2016 2:20 pm

Re: K-Mix

Post by geremy » Thu Jun 02, 2016 11:02 pm

I would imagine so, as when in midi mode it outputs all buttons/sliders/dials.

Kites
Expert
Posts: 50
Joined: Thu Dec 31, 2015 9:18 pm

Re: K-Mix

Post by Kites » Fri Jun 03, 2016 1:17 am

geremy wrote:I would imagine so, as when in midi mode it outputs all buttons/sliders/dials.
Well, the problem is that Auria Pro only takes Mackie Control, not MIDI. :cry:

geremy
Member
Posts: 6
Joined: Thu Jun 02, 2016 2:20 pm

Re: K-Mix

Post by geremy » Fri Jun 03, 2016 5:42 am

The k-mix can do some mcu/hcu stuff I believe, but I don't know how much. By default the k-mix transport controls do not work in Auria.

Kites
Expert
Posts: 50
Joined: Thu Dec 31, 2015 9:18 pm

Re: K-Mix

Post by Kites » Sat Jun 04, 2016 8:01 pm

Thanks for checking this out. Crossing my fingers and hoping you get it all working.

Corey W
Expert
Posts: 568
Joined: Tue Sep 23, 2014 11:58 am

Re: K-Mix

Post by Corey W » Mon Jun 06, 2016 1:59 pm

I just heard back from Keith McMillon Instruments and they stated that K-MIX firmware version 1.2.11 brings full iOS compatibility. They also stated that, "Currently, however, Mackie control protocol is only supported on the K-Mix transport buttons."

We should have one soon in the office for testing, so I will report back with any updates.

geremy
Member
Posts: 6
Joined: Thu Jun 02, 2016 2:20 pm

Re: K-Mix

Post by geremy » Tue Jun 07, 2016 11:54 am

Great! I look forward to future developments. I'm loving my k-mix with Auria so far.

Kites
Expert
Posts: 50
Joined: Thu Dec 31, 2015 9:18 pm

Re: K-Mix

Post by Kites » Sat Jun 11, 2016 5:48 am

I'm really hoping the faders are going to work. :oops: :o :shock: :shock:

Kites
Expert
Posts: 50
Joined: Thu Dec 31, 2015 9:18 pm

Re: K-Mix

Post by Kites » Tue Jun 14, 2016 5:10 pm

Corey W wrote:I just heard back from Keith McMillon Instruments and they stated that K-MIX firmware version 1.2.11 brings full iOS compatibility. They also stated that, "Currently, however, Mackie control protocol is only supported on the K-Mix transport buttons."

We should have one soon in the office for testing, so I will report back with any updates.
Hey Corey, did you guys get your K-Mix in yet?

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests