nanoKONTROL2 not working with machie hui config
-
- Member
- Posts: 15
- Joined: Thu Dec 05, 2013 3:29 am
nanoKONTROL2 not working with machie hui config
Im having some problems with my Korg nanoKONTROL2 its not working when i put it in the hui mode. Nothing happens can i have some help with this? thanks in advance.
- djjuniorpops
- Expert
- Posts: 151
- Joined: Wed May 08, 2013 11:43 am
Re: nanoKONTROL2 not working with machie hui config
Follow the steps below and it should work
1. hold down the set and play while plugging in the USB,this is to get it in the mode for Auria
2. go to the midi settings tab and select receive remote under the midi input,after doing this it would also be selected
under the midi output tab
3. set the remote protocol to Mackie HUI
4. set the MMC Device to 1
5. turn on send midi in start and stop and also under song position pointer.
Thats it, hope this help for you.
1. hold down the set and play while plugging in the USB,this is to get it in the mode for Auria
2. go to the midi settings tab and select receive remote under the midi input,after doing this it would also be selected
under the midi output tab
3. set the remote protocol to Mackie HUI
4. set the MMC Device to 1
5. turn on send midi in start and stop and also under song position pointer.
Thats it, hope this help for you.
-
- Member
- Posts: 15
- Joined: Thu Dec 05, 2013 3:29 am
Re: nanoKONTROL2 not working with machie hui config
Thanks it worked
- djjuniorpops
- Expert
- Posts: 151
- Joined: Wed May 08, 2013 11:43 am
Re: nanoKONTROL2 not working with machie hui config
No Problem glad it worked, enjoy.wettybeatz wrote:Thanks it worked
Who is online
Users browsing this forum: No registered users and 144 guests