Another Reverb Bug
Another Reverb Bug
I know it's been reported (and fixed! in the next update) that the Convolution reverb resets itself to the default (Abbey Rd Plate). The Classic reverb does the same thing. You make some changes to it, save it as a setting, and when you close it and reopen it, it's back to the default.
I bought the program yesterday, don't have my interface yet, and did some recording with the ipad mic and you guys did a wonderful job with Auria! I'm going to be using it a lot! And your support on the forum is outstanding! Thanks!
I bought the program yesterday, don't have my interface yet, and did some recording with the ipad mic and you guys did a wonderful job with Auria! I'm going to be using it a lot! And your support on the forum is outstanding! Thanks!
Re: Another Reverb Bug
Thanks, we'll have a look at ClassicVerb as well. I appreciate it.
Rim
Rim
Re: Another Reverb Bug
I couldn't duplicate this here. This is what I did:
1. Add ClassicVerb to a track
2. Set all controls in ClassicVerb to 0 (full left)
3. Close project by loading another project
4. Load project again
5. Open track with ClassicVerb on it.
6. ClassicVerb still has all controls set full left
Also, I tried this, and it worked:
1. Add ClassicVerb to a track
2. Set all controls in ClassicVerb to 0 (full left)
3. Save it as a Preset
4. Close project by loading another project
5. Load project again
6. Open track with ClassicVerb on it.
7. ClassicVerb still has all controls set full left
Am I doing anything differently that you were?
Thanks,
Rim
1. Add ClassicVerb to a track
2. Set all controls in ClassicVerb to 0 (full left)
3. Close project by loading another project
4. Load project again
5. Open track with ClassicVerb on it.
6. ClassicVerb still has all controls set full left
Also, I tried this, and it worked:
1. Add ClassicVerb to a track
2. Set all controls in ClassicVerb to 0 (full left)
3. Save it as a Preset
4. Close project by loading another project
5. Load project again
6. Open track with ClassicVerb on it.
7. ClassicVerb still has all controls set full left
Am I doing anything differently that you were?
Thanks,
Rim
Re: Another Reverb Bug
Hi Rim
I have followed your procedures but unfortunately my settings always return to default and not just in ClassicVerb or Convolution Reverb. Echo, MicroWarmer, Pro Q etc., all plugins are returning to default settings even without leaving the project.
1. Add ClassicVerb to a track
2. Set all controls in ClassicVerb to 0 (full left)
3. Close project by loading another project
4. Load project again
5. Open track with ClassicVerb on it.
6. ClassicVerb still has all controls set full left - NO, RETURNS TO DEFAULT SETTINGS
Also, I tried this,
1. Add ClassicVerb to a track
2. Set all controls in ClassicVerb to 0 (full left)
3. Save it as a Preset
4. Close project by loading another project
5. Load project again
6. Open track with ClassicVerb on it.
7. ClassicVerb still has all controls set full left - NO, RETURNS TO DEFAULT SETTINGS
I am currently running iPad 1 so not sure if this is the reason. Auria works well as long as everything else is closed although I do feel this app needs (and deserves) more power so I am awaiting delivery of an iPad 3 and all because of Auria so thanks for that
Keep up your good work.
Regards
Trueyorky
I have followed your procedures but unfortunately my settings always return to default and not just in ClassicVerb or Convolution Reverb. Echo, MicroWarmer, Pro Q etc., all plugins are returning to default settings even without leaving the project.
1. Add ClassicVerb to a track
2. Set all controls in ClassicVerb to 0 (full left)
3. Close project by loading another project
4. Load project again
5. Open track with ClassicVerb on it.
6. ClassicVerb still has all controls set full left - NO, RETURNS TO DEFAULT SETTINGS
Also, I tried this,
1. Add ClassicVerb to a track
2. Set all controls in ClassicVerb to 0 (full left)
3. Save it as a Preset
4. Close project by loading another project
5. Load project again
6. Open track with ClassicVerb on it.
7. ClassicVerb still has all controls set full left - NO, RETURNS TO DEFAULT SETTINGS
I am currently running iPad 1 so not sure if this is the reason. Auria works well as long as everything else is closed although I do feel this app needs (and deserves) more power so I am awaiting delivery of an iPad 3 and all because of Auria so thanks for that
Keep up your good work.
Regards
Trueyorky
Re: Another Reverb Bug
Anyone else experiencing this issue?
Thanks,
Rim
Thanks,
Rim
Re: Another Reverb Bug
I am experiencing the same thing. I set up "vocal plate" on the insert of a project. I close and reopen to find that it has reset. It still says "vocal plate" as the preset though. The only workaround is to reselect the preset. Also freezing the track pans the entire track to the left. It's almost as if this project is somehow mixing itself with another project that I have that is using "Enya Hall", because thats how it sounds whenever I reopen it. Thanks again.
Re: Another Reverb Bug
@dbgrass,
The freezing issues have been fixed already, as well as the issues with the convolution reverb not remembering your settings. The question is: have you experienced this issue with the ClassicVerb as well?
Rim
The freezing issues have been fixed already, as well as the issues with the convolution reverb not remembering your settings. The question is: have you experienced this issue with the ClassicVerb as well?
Rim
Re: Another Reverb Bug
@Rim Thanks for the info. I will run some tests using the ClassicVerb in this particular project and report back with my results.
Thanks again for a great app.
Thanks again for a great app.
Re: Another Reverb Bug
Hi Rim
I checked a few projects today, and it seems that the ClassicVerb is retaining it's setting satisfactorily. I have an iPad3 if that is of any help.
Dave
I checked a few projects today, and it seems that the ClassicVerb is retaining it's setting satisfactorily. I have an iPad3 if that is of any help.
Dave
Re: Another Reverb Bug
Well I have now upgraded to iPad 3, re-installed Auria and restored my data and I still have the same problem. So using ClassicVerb I set all pots to the left and X back to my current project. Go back into ClassicVerb and everything has reset back to the default positions. I must stress that I have had the same issue with all plugins so far.
I hope this problem goes away when the new update comes through.
I hope this problem goes away when the new update comes through.
Re: Another Reverb Bug
There's a good chance it won't go away with the new update just submitted, as this isn't something I fixed (I can't duplicate this here yet). There must be something different that your project has, or that you're doing...
Does this happen on the Aux inserts, or only on a channel insert?
On a fresh install of Auria, I tried inserting a ClassicVerb on track 1 of the demo song (The Approach). I press the "e" button to open the ClassicVerb screen. I move all the knobs in ClassicVerb to the left. I close the ClassicVerb screen. I press the "e" again, and the knobs are all still left, where they should be.
Rim
Does this happen on the Aux inserts, or only on a channel insert?
On a fresh install of Auria, I tried inserting a ClassicVerb on track 1 of the demo song (The Approach). I press the "e" button to open the ClassicVerb screen. I move all the knobs in ClassicVerb to the left. I close the ClassicVerb screen. I press the "e" again, and the knobs are all still left, where they should be.
Rim
Re: Another Reverb Bug
It's happening on the Aux inserts--I didn't try it with a channel insert. That might lead you to the problem. iPad 2 here.
Re: Another Reverb Bug
Hmm. I just tried on both Aux and channel inserts and it works here. When you have a chance, you you try it on your channel inserts? Also, sometimes a short video of exactly what you do to make this happen helps. You'd be amazed that a simple difference in the way you might do something can reveal a bug that others might not see.
Thanks,
Rim
Thanks,
Rim
Re: Another Reverb Bug
Well done Rim. Your mention of the little 'e' button was enough to make me smile as I hadn't been using that. Now I have and all of my problems have gone away. Thank you and sorry ps does it reference this in the manual?
WOW Auria is dreamy on iPad 3 so come on Apple bring on the new update.
WOW Auria is dreamy on iPad 3 so come on Apple bring on the new update.
Re: Another Reverb Bug
No problem at all, glad that helped.
Rim
Rim
Who is online
Users browsing this forum: Google [Bot] and 8 guests