Is there any work around for this or is it simply a case of endlessly unplugging the cable?
Is there a fix planned?
Thanks and all the best,
Oscar
MIDI ports not appearing when using iConnectivity interface
-
- Member
- Posts: 16
- Joined: Sun Sep 04, 2016 5:46 am
- Anthony Alves
- Expert
- Posts: 1444
- Joined: Sat Mar 10, 2012 9:52 am
Re: MIDI ports not appearing when using iConnectivity interf
which iConnectivity interface are you using. I use the 2 and it all shows up fine here. Try turning off your iConnectivity interface by holding down the power button on the front till it shuts off. then touch the same button to turn it on again. This reboots the iConnectivity interface. Cheers.
-
- Member
- Posts: 16
- Joined: Sun Sep 04, 2016 5:46 am
Re: MIDI ports not appearing when using iConnectivity interf
I'm using the 4+
The ports show up but they are pushed down to the bottom of the list and by the 8 host ports (the 2+ model lacks a host port so wouldn't have this problem). Because only 10 ports are displayed, they are inaccessible.
You end up unplugging and re attaching the audio interface dosens of times per session in order to get the internal ports to the top of the list. Not ideal!
The ports show up but they are pushed down to the bottom of the list and by the 8 host ports (the 2+ model lacks a host port so wouldn't have this problem). Because only 10 ports are displayed, they are inaccessible.
You end up unplugging and re attaching the audio interface dosens of times per session in order to get the internal ports to the top of the list. Not ideal!
-
- Member
- Posts: 16
- Joined: Sun Sep 04, 2016 5:46 am
Re: MIDI ports not appearing when using iConnectivity interf
Thanks for the link but I don't think it's something that can be solved with the interface. Issue is simply that Auria only shows the first 10 MIDI ports and the iConnectivity device already occupies all 10.
Who is online
Users browsing this forum: Google [Bot] and 2 guests